SHED WATER AND CARRY IT AWAY FROM YOUR BUILDING
Similar to a residence, water mitigation is essential to the longevity of a commercial building. Water can threaten the integrity of the building’s framing and other metal components by causing rust. These accessories are either designed to take water away from the building’s perimeter or keep moisture from penetrating the building’s interior.
GUTTERS AND DOWNSPOUTS
Gutters run parallel to the building’s roofline and connect to your choice of 10’ to 28’ downspouts. As the roof of your building sheds water, this system carries the moisture away from the building’s foundation, framing and connections.
ROOF PITCH
The pitch of the roof can be as low as .25:12 to as steep as 6:12 and play both an aesthetic as well as functional purpose. While a 1:12 roof can be engineered to endure the same snow load as a 6:12, the steeper roof does naturally shed snow easier than the lower pitch.
BOLT ON CANOPIES
These small overhangs provide coverage over walk doors which can keep the metal components cool in warm weather and also keep snow from accumulating next to the entrance during the winter.
INSULATION
Prevents the condensation that is created when warm air from inside your steel building comes into contact with a cold surface such as your roof or wall panels. It’s important to note that spray foam insulation is not recommended for metal buildings.
GenStone
Offers both brick and stacked stone colors that can give your building the rugged look of natural materials. GenStone panels deliver an average R-Value of 3.6 per inch and are 100% waterproof.
INSULATED PANELS
Attach to your building in the same way as the standard 26 gauge sheeting but provide a higher R-Value with the insulation manufactured into each piece of sheeting.
MASTER FLASH
Provides an insulated and weather tight space for you to pass electrical wires, pipes, electrical service entrances and more through the walls and roof of the building.
